Afterburner controller for small EDF, diameter up to 60 mm, powered from BEC 5 V, ( max 5,5 V ).
Jet Afterburner Simulator NF-Jet1 belt
NF-Jet1 belts are produced in one variant that contatin belt of maximal diameter of 60mm that is madde up from 12 segments (2LEDs per segment / 24 LEDs total), which can be removed and belt can be shortened. Every belt represents 5mm of diameter. NF-Jet1 belts contain 3mm LEDs in two color combinations - Yellow/Yellow or Yellow/Red.
The NF-Jet1 belts are designed to work with NF-Jet1 modules which serve to simulate flame on the output of the jet engine using red and yellow ultra bright LEDs 3 mm. The intensity of the flame follows the power of the engine. Red color starts to light at the beginning of "gas" range. The yellow LED starts on the middle of the range. To increase the reality of the flame the light intensity changes in pseudo-random period. The frequency of changes speeds up when increasing the engine power.
Maximum voltage is 6,0 V.
Do not forget! If You need a smaller circle you can shorten the belt by cutting of one or more segments from the belt.